CDC 500 Series Chain Actuator

  • Ideal for smart buildings; integrate with building and home automate systems
  • Automated operation of multiple awning windows, hopper windows, casement windows, curtain wall vents, and skylights
  • Certified for Smoke & Heat Extraction (SHE)
  • Perfectly suited for profile integrated and surface mounted installation
  • Low voltage DC motors are energy efficient
  • TMS+ tandem safety function for operating 2 drives on one sash
  • 3.5 meter connection cable with interconnect plug. Connection available on both ends of the actuator.
  • Push/Pull Force up to 250 N (56 lbf), 1500N Locking Force
  • Off-center chain orientation actuator
  • Pre-programmed opening from 80mm up to 500mm
  • Programmable drive functions and different drive parameters
  • UL Recognized
  • Applications

    spacer

    • For concealed automation of awning windows, hopper windows, casement windows, curtain wall vents or skylights.
    • For commercial, institutional and residential projects, including schools, universities, municipal buildings, offices, gymnasiums, homes, condos, and more.
    • Natural Ventilation systems, such as operable windows and skylights, save energy and lower operating costs by reducing air conditioning and heating use.
    • LEED credits for green building projects can be earned under Indoor Environmental Quality for Natural Ventilation, Daylighting and Views.
    • Smoke Evacuation systems reduce smoke, heat and casualties during a fire; AFI actuators are SHE certified.
  • Actuator Features

    spacer

    CDC 500 actuators are medium duty operators, with compact casing and low noise operation.
    Push force: Up to 250N (56 lbf)
    Pull force: Up to 250N (56 lbf)
    Chain is off-center in casing
    Built in limit switch for Open
    Integrated electronic power cut-off for Closed
    Actuators available in White powder coated finish, custom RAL finishes available
    Tested to 10,000 cycles
    Interconnectors fit flush into the actuator body
    Can be plugged into either side of the actuator
    Tandem Capability
    Must be specified at order
  • Pre-Programmed Features

    spacer

    Chain Stroke: Pre-programmed opening from 80mm up to 500mm
    Speed Adjustment: Programmable from 9.4mm/sec down to 6.7mm/sec for quiet operation
    Speed Reduction: For the last seconds of closing, as a safety precaution.
    Seal Relief Adjustment: Between 0-20mm to protect sash at closed position.
    Feedback Signal: OPEN or CLOSE can be selected
  • Specifications

    spacer

    Opening: Pre-programmed opening from 80mm up to 500mm
    Force: 56 lbf. (250 N) push/pull
    Speed: Programmable from 9.4mm/sec down to 6.7mm/sec for quiet operation.
    Safety Marks: UL Recognized
    Use with: AFI UL Actuator & Control System
    DC voltage: 24 Vdc (-20% / +25%) low voltage
    Amp rating: 0.6 amps approx. at 250N full load
    Power cable: 3.5 meter connection cable can be connected on either side (sold separately)
    Dimensions: 30 x 35mm (1.18” H x 1.38” W ) x length varies with chain
    Signal feedback: Status signal open or closed available
  • Options

    spacer
    AFI Field Power Switch: For use with AFI DC Actuators, for testing, installation and maintenance, such as to extend the chain to attach to a window at installation. For connecting one to 3 actuators (up to 1.0 amps total of actuators at startup).

  • Warranty

    spacer

    • Tested to 10,000 cycles.
    • 5-year manufacturer’s warranty; requires use according to Installation Guide recommendations.