E-LOCK is a linear drive designed to lock the window hardware and ensure, in combination with a chain actuator, the best window closing tightness. This locking device can be integrated into the window profile or on the profile, connected to the window hardware through a slot. It has been designed to be used in combination with electric chain actuators series QUASAR, VEGA and NANO 24 Vdc.
| Ideal for smart buildings; integrate with building and home automation systems. |
| Certified for Smoke & Heat Extraction (SHE) |
| Force: 600N (135 lbf) |
| Built in limit switch |
| Stroke: | 19 to 38mm |
| Force: | 135 lbf. (600 N) push/pull |
| Speed: | 1.6mm/sec |
| Safety Marks: | UL Recognized |
| Use with: | Nano, Vega or Quasar Series actuators |
| DC voltage: | 24 Vdc (-20% / +25%) low voltage |
| Amp rating: | 0.3 amps approx. at 600N full load |
| Power cable: | 3.5 meter connection cable can be connected on either side (sold separately) |
| Dimensions: | 498 x 25 x 25mm (19.6” L x 1” H x 1″ W ) |
| Signal feedback: | Status signal open or closed available |
42138L: Long Fork Kit – For installation of E-Lock outside the frame of the window.
41596Q: Emergency unlocking tool (included in E-Lock and E-Lock BMS Line).
AFI Field Power Switch: For use with AFI DC Actuators, for testing, installation and maintenance, such as to extend the chain to attach to a window at installation. For connecting one to 3 actuators (up to 1.0 amps total of actuators at startup).